Set/Define Ports Broadcast; Set/Define Ports Character Size - Lantronix SCS Reference Manual

Command Reference

12.6.18 Set/Define Ports Broadcast

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Enables or disables other users' broadcasts to this port. Broadcasts are typically disabled when extra
messages are not desired on the port's output device.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also

12.6.19 Set/Define Ports Character Size

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Sets the number of bits per character for the serial port.
⎧
ENABLED
⎨
BROADCAST
⎩
ALL DISABLED
Requires privileged user status if you want to use this command on ports other
than your own. Secure users may not use this command.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Enabled
Local>> SET PORTS BROADCAST ENABLED
Broadcast, page 12-180; Set/Define Server Broadcast, page 12-116
CHARACTER SIZE
ALL
12-64
⎫
⎬
⎭
⎧ ⎫
7
⎨ ⎬
⎩ ⎭
8
Port Commands