Define Ports Modem Connected - Lantronix SCS Reference Manual

Command Reference
The DisableString and the EnableString must be entered together.
Note:
Defaults
Examples
See Also

12.4.8 Define Ports Modem Connected

DEFINE PORTS PortList
Defines a string to expect on outbound calls when the modem is connected to the remote location.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Defaults
Examples
See Also
DisableString
A string of up to 12 characters. When this string is received by the modem, data
compression will be disabled
EnableString
A string up to 12 characters. When this string is received by the modem, data
compression will be enabled.
Disabled (no strings defined)
Local>> DEFINE PORT 2 MODEM COMPRESSION ENABLED
Local>> DEFINE PORT 2 MODEM COMPRESSION "%c" "%c1"
Profile Settings, page 9-5; Compression, page 9-9
MODEM CONNECTED ConnectString
ALL
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
ConnectString
A string of up to 12 characters. Commonly set to "CONNECT."
Depends on modem and modem profile.
Local>> DEFINE PORT 2 MODEM CONNECT "CONNECT"
Profile Settings, page 9-5
12-7
Modem Commands