Set/Define Authentication Local - Lantronix SCS Reference Manual

Command Reference
Defaults
See Also

12.10.7 Set/Define Authentication Local

⎧ ⎫
SET
⎨ ⎬
AUTHENTICATION LOCAL PRECEDENCE num
⎩ ⎭
DEFINE
Specifies that an SCS database (saved in NVR or RAM) will be used for authentication. The precedence
number is set to 1 by default.
Restrictions
Parameters
Defaults
Maxtries
Specifies the maximum number of times that the SCS will attempt to contact
the Kerberos server.
tries
An integer between 1 and 255, inclusive.
Realm
Sets the Kerberos realm that the SCS resides in. Often set to a name that
mirrors the Internet domain name system. Must be used in conjunction with the
string parameter, discussed earlier.
KVNO (Key Version Number)
Ensure that the SCS and the Kerberos server are using the correct authenticator
for the defined principle/instance pair. The KVNO for the SCS must match the
Kerberos server's KVNO. Must be used in conjunction with the kvno_num
parameter.
kvno_num
An integer between 1 and 255, inclusive.
Principle: rcmd
Instance: SCS
Encryption: MIT
PortNum: 750
Timeout: 3 seconds
MaxTries: 5
Define Site Authentication, page 12-132; Kerberos, page 11-11
Requires privileged user status.
Precedence
Sets the precedence in which this database or server is checked. Must be used
in conjunction with the prec_num parameter.
prec_num
A precedence number between 1 and 6, usually set to 1.
Precedence: 1
12-156
Security Commands