Table of Contents
Advertisement
The gateway address must be within the local network. The default setting is N (No), meaning the
gateway address has not been set. To set the gateway address, type Y and enter the address.
Set Gateway IP Address (N) ? Y
Gateway IP addr (000) (000) (000) (000)_
Netmask: Number of Bits for Host Part
A netmask defines the number of bits taken from the IP address that are assigned for the host
part.
Netmask: Number of Bits for Host Part (0=default) (0) _
The unit prompts for the number of host bits to be entered, then calculates the netmask, which
appears in standard decimal-dot notation (for example, 255.255.255.0) when the saved
parameters display. The default setting is 0.
Set DNS Server IP Address
The DNS server allows the name of a remote machine to be resolved automatically. The default
is N (No), indicating the DNS server address has not been set. To set the DNS server address,
type Y. At the prompt, enter the DNS server address. If the device is DHCP enabled, the DHCP
server provides the DNS server IP address, which will override this configured value.
Note:
This setting is applicable only in Manual Connection mode.
Set DNS Server IP addr
Change Telnet Configuration Password
Setting the Telnet configuration password prevents unauthorized access to the setup menu
through a Telnet connection to port 9999 or through web pages. The password must have 4
characters. The default setting is N (No).
Change Telnet/Web Manager password (N) ?
An enhanced password setting (for Telnet and Web access) of 16 characters is available under
Configurable Server Port Number.
WiBox® 2100E Device Server User Guide
Table 6-2. Standard IP Network Netmasks
Network Class
Host Bits
A
24
B
16
C
8
(N) ?
6: Setup Mode: Server Configuration
Netmask
255.0.0.0
255.255.0.0
255.255.255.0
47
Advertisement
Table of Contents
