Set/Define Ports Access - Lantronix SCS Reference Manual

Command Reference
Examples
See Also

12.6.10 Set/Define Ports Access

⎧ ⎫
SET PORTS PortList
⎨ ⎬
⎩ ⎭
DEFINE
Sets the type of incoming connections allowed through the physical port.
Restrictions
Errors
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
string
Enter a character string with a maximum length of 32 characters. Enclose the
string in quotes to preserve case and spaces.
Mailhost
Sets the SMTP mailhost. Enter a string with maximum length of 24 characters.
Enclose the string in quotes to preserve case and spaces.
Replyto
Sets the email address that any response to the email notification will be sent
to. Enclose the address in quotes to preserve case and spaces. The max
number of characters for this field is 32.
DEFINE EMAIL port2 TO "ahab@strut.com, crash@strut.com"
Set/Define Ports Serial Log, page 12-85; Define Ports Event Email Serialdata,
page 12-71; Event Port Logging, page 3-2
⎧
⎪ DYNAMIC
⎪
LOCAL
⎨
ACCESS
⎪
ALL NONE
⎪
REMOTE
⎩
Requires privileged user status.
If a port is active, its access cannot be set.
Autobaud must be disabled for Remote and Dynamic ports.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Dynamic
The ports can receive connection requests from local and remote users.
Local
The ports can only accept connection requests from local users (those
connected to the serial ports). No remote logins are permitted.
None
The specified ports are unusable.
⎫
⎪
⎪
⎬
⎪
⎪
⎭
12-57
Port Commands