Set/Define Ip Trusted - Lantronix SCS Reference Manual

Command Reference

12.5.31 Set/Define IP Trusted

⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP TRUSTED address RIP
⎩ ⎭
DEFINE
Configures a list of trusted routers. When Set/Define IP All/Ethernet Trusted is enabled, the SCS will only
listen to RIP updates from routers in this list.
Restrictions
Parameters
See Also
12.5.32 Set/Define IP Trusted
⎧ ⎫
SET
⎨ ⎬
PROTOCOLS IP TRUSTED address RIP
⎩ ⎭
DEFINE
Configures a list of trusted routers. When Set/Define IP All/Ethernet Trusted is enabled, the SCS will only
listen to RIP updates from routers in this list.
Restrictions
Parameters
See Also
Requires privileged user status.
address
An IP address in standard numeric format (for example, 193.0.1.50).
RIP
When enabled, sets the specified IP address as a trusted routers. By default,
routers are not trusted.
Set/Define IP All/Ethernet, page 12-35; Show/Monitor/List HostsTrusted,
page 12-48; Clear/Purge IP Trusted, page 12-20; Types of Routes, page 6-19
Requires privileged user status.
address
An IP address in standard numeric format (for example, 193.0.1.50).
RIP
When enabled, sets the specified IP address as a trusted routers. By default,
routers are not trusted.
Set/Define IP All/Ethernet, page 12-35; Show/Monitor/List HostsTrusted,
page 12-48; Clear/Purge IP Trusted, page 12-20; Types of Routes, page 6-19
12-47
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
⎧ ⎫
ENABLED
⎨ ⎬
⎩ ⎭
DISABLED
IP/Network Commands