Define Ports Dialback; Set/Define Ports Dsrlogout - Lantronix SCS Reference Manual

Secure console servers
Table of Contents

Advertisement

Command Reference

12.6.23 Define Ports Dialback

DEFINE PORTS PortList
ALL
Turning on Dialback causes the SCS to check the dialback table (see Set/Define Dialback) each time a user
logs in. If the entered username is not in the table, the port is logged out. If the username is in the table, the
port is logged out and the SCS sends the dialback string to the port and awaits a second login. Typically, the
dialback string will cause the modem attached to the port to call the user back at a certain telephone number
for security reasons. Ports with dialback enabled have a 30-second time limit for entering the username
when logging in.
In order to use Dialback functionality, modem control must be enabled, and a modem profile must be
associated with the port. When Dialback is enabled, Modem Control is enabled by default. However,
disabling Dialback does not disable Modem Control; Modem Control must explicitly be disabled if so
desired.
Restrictions
Parameters
In the absence of a PortList or the All parameter, the configuration will affect the
Note:
current port only.
Examples
See Also

12.6.24 Set/Define Ports DSRLogout

SET
PORTS PortList
DEFINE
When enabled, the port will be logged out when the port's DSR signal is dropped. This usually only occurs
when the attached terminal device is powered off or disconnected; it is intended to keep users from
switching terminal lines to access other sessions. Any open connections will be closed before logging out.
Restrictions
ENABLED
DIALBACK
DISABLED
Requires privileged user status.
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers should
be separated with commas (for lists) or dashes (for ranges).
Local>> DEFINE PORT 3 DIALBACK ENABLED
Set/Define Dialback, page 12-165; Show/Monitor/List Dialback, page 12-178;
Define Ports Modem Control, page 12-8; Define Ports Modem Type, page 12-
16; Show/Monitor/List Ports, page 12-96; Dialback, page 8-12; Dialback,
page 11-5
ENABLED
DSRLOGOUT
ALL
DISABLED
Requires privileged user access.
12-70
Port Commands

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCS and is the answer not in the manual?

Table of Contents