Management Application Encryption Wizard Troubleshooting; Errors Related To Adding A Switch To An Existing Group - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

6

Management application encryption wizard troubleshooting

Management application encryption wizard troubleshooting

Errors related to adding a switch to an existing group

Table 11
group, and describes how to troubleshoot them.
TABLE 11
Error recovery instructions for adding a switch to an existing group
Configuration task
Initialize the switch
Initialize the switch
Add the switch to the encryption
group
Enable the encryption engines
Save the switch's public key
certificate to a file.
330
•
Errors related to adding a switch to an existing group . . . . . . . . . . . . . . . . 330
•
Errors related to adding a switch to a new group . . . . . . . . . . . . . . . . . . . . 331
•
General errors related to the Configure Switch Encryption wizard . . . . . . 332
lists configuration task errors you might encounter while adding a switch to an existing
Error description
Unable to add switch to encryption
group. The switch is no longer a group
leader or does not contain a group.
The switch was not properly initialized
and was aborted because it is
unavailable.
Adding the switch to the encryption
group failed.
A failure occurred while attempting to
enable encryption engines on the
switch.
The switch's public key certificate could
not be saved to a file.
Note: Verify that the path name and the
file name that you are using are both
valid and that you have write
permissions for the file.
Instructions
Manual option:
To add a switch to the group on the leader switch:
1 Relaunch the Configure Switch Encryption wizard
and create a new encryption group on the leader
switch.
2 When that group is created, launch the Configure
Switch Encryption wizard again and add the switch to
the group.
Rerun the Configure Switch Encryption wizard for the
switch.
Rerun the Configure Switch Encryption wizard for the
switch.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2 Rerun the Configure Switch Encryption wizard for the
switch.
Manual Option:
1 Save the switch's public key certificate to a file using
the Switch Encryption Properties dialog box.
2 Follow the Key Vault instructions for
RSA/Decru/Other key vault.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2 Rerun the Configure Switch Encryption wizard for the
switch.
Manual Option:
1 Save the switch's public key certificate to a file using
the Switch Encryption Properties dialog box.
2 Follow the Key Vault instructions.
Fabric OS Encryption Administrator's Guide (SKM/ESKM)
53-1002721-01