sRs
Driver's Airbag Replacement (cont'd)
Installation
1. Place the new driver's airbag (A) inthesteering
wheel, and secure itwith new Torx bolts (B). Install
the covers (C).
B
9.8 N.m {1.0 kgf.m,7.2 lbf.ft)
23-66
I
2. Connect the cable reel 2P co nnecto r to the driver's
a i r b a g ( A ) , t h e n i n s t a l l t h e a c c e s s p a n e l ( C ) o n t h e
steering wheel.
Connect the battery negative cable.
After installing the airbag, confirm proper system
operatron:
. Turn the ignition switch ON (ll); the SRS indicator
should come on for about 6 seconds and then go
off.
. Make sure the horn works.
I