sRs
8.
Cable Reel Replacement (cont'd)
Install the steering wheel bolt (A), and tighten it to
38 N.m (3.9 kgf.m, 28 lbf.ft).
Connect the cruise control switch connector.
Installthe driver's airbag (see page 23-66).
Reconnect the battery negative cable.
9 .
1 0 .
1 1 .
23-7 4
12. After installing the cable reel, confirm proper
system operat|on:
. Turn the ignition switch ON (ll); the SRS indicator
should come on for about 6 seconds and then go
off.
. After the SRS indicator has turned off. turn the
steering wheel fully left and right to confirm the
indicator does not come on.
. Make sure the horn works.