sRs
Cable ReelReplacement
Removal
1. Make sure the front wheels are aligned straight
a h e a d .
Disconnect the battery negative cable and wait at
least 3 minutes.
Remove the driver's airbag lsee page 23-65).
Remove the steering wheel (see page 17-6).
Remove the column cover screws (A), then remove
the column covers (8, C).
r
23-72
6. Disconnect the SRS main harness 2P connector {A)
from the cable reel (B), then disconnect the
dashboard wire harness 4P connector (C) from the
cable reel.
'1.
Remove the screws {A) from the cable reel, then
remove the cable reel from the column.