Ospf Timer Poll; Ospf Timer Retransmit - HP FlexNetwork 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer hello 20

ospf timer poll

Syntax
ospf timer poll seconds
undo ospf timer poll
View
Interface view
Default level
2: System level
Parameters
seconds: Poll interval in seconds, in the range of 1 to 2147483647.
Description
Use ospf timer poll to set the poll interval on an NBMA interface.
Use undo ospf timer poll to restore the default value.
By default, the poll interval is 120s.
When an NBMA interface finds its neighbor is down, it will send hello packets at the poll interval.
IMPORTANT:
The poll interval must be at least four times the hello interval.
Related commands: ospf timer hello.
Examples
# Set the poll timer interval on the current interface to 130 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer poll 130

ospf timer retransmit

Syntax
ospf timer retransmit interval
undo ospf timer retransmit
View
Interface view
Default level
2: System level
Parameters
interval: LSA retransmission interval in seconds, in the range of 1 to 3600.
113