Password-Recovery Enable - HP FlexFabric 12900 series Command Reference Manual

Parameters
cpu-threshold: Specifies the CPU usage threshold in percentage. The value range is 0 to 100.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command sets
the CPU usage threshold for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device by its slot number
and the member ID. If you do not specify this option, the command sets the CPU usage threshold for the
global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number. The cpu-number argument is fixed at 0.
Usage guidelines
The device samples CPU usage at an interval of 1 minute. If the sample is greater than the CPU usage
threshold, the device sends a trap.
Examples
# Set the CPU usage threshold to 80%.
<Sysname> system-view
[Sysname] monitor cpu-usage threshold 80
Related commands
• display cpu-usage
display cpu-usage configuration
•
display cpu-usage history
•
monitor cpu-usage enable
•
monitor cpu-usage interval
•

password-recovery enable

Use password-recovery enable to enable password recovery capability.
Use undo password-recovery enable to disable password recovery capability.
Syntax
password-recovery enable
undo password-recovery enable
Default
Password recovery capability is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Password recovery capability controls console user access to the device configuration and SDRAM from
BootWare menus.
If password recovery capability is enabled, a console user can access the device configuration without
authentication to configure new passwords.
231