Assign Local Login (Operator) And Enable (Manager) Password; Configuring The Switch For Ssh Operation - HP Q.11.XX Manual

Procurve 2510 series switches
Table of Contents

Advertisement

Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section
show ip ssh
show crypto client-public-key [<manager | operator>] [keylist-str]
[< babble | fingerprint >]
show crypto host-public-key [< babble | fingerprint >]
show authentication
crypto key < generate | zeroize > ssh [rsa]
ip ssh
filetransfer
port < 1 - 65535 | default >
timeout < 5 - 120 >
aaa authentication ssh
login < local | tacacs | radius | public-key >
< local | none >
enable < tacacs | radius | local >
< local | none >
copy tftp pub-key-file <tftp server IP> <public key file> [<append |
manager | operator>]
clear crypto client-public-key <manager | operator > [keylist-str]
1. Assign Local Login (Operator) and Enable (Manager)
Password
At a minimum, ProCurve recommends that you always assign at least a
Manager password to the switch. Otherwise, under some circumstances,
anyone with Telnet, web, or serial port access could modify the switch's
configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
Syntax: password < manager | operator | all >
Configuring Secure Shell (SSH)

Configuring the Switch for SSH Operation

Page
6-17
6-25
6-14
6-21
6-11
6-16
6-16
6-16
6-16
6-19, 6-20
6-19
6-19
6-19
6-25
6-26
6-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U.11.xxProcurve 2510-24Procurve 2510-48

Table of Contents