Show Setup Snmp - HP AK241A - StorageWorks 8Gb Simple SAN Connection Cli Manual

show setup snmp

Description Displays the current SNMP settings.
Authority None
Syntax
show setup snmp
common
trap [trap_number]
Operands
common
Displays SNMP configuration parameters that are common to all traps. To display common and
trap-specific parameters, omit the operand. See
configuration parameters.
trap [trap_number]
Displays SNMP configuration parameters for the trap given by [trap_number]. To display
common and trap-specific parameters, omit the operand. See
trap-specific configuration parameters.
Examples The following is an example of the show setup snmp common command:
8/20q FC Switch #> show setup snmp common
SNMP Information
----------------
SNMPEnabled
Contact
Location
Description
ObjectID
AuthFailureTrap
ProxyEnabled
SNMPv3Enabled
The following is an example of the show setup snmp trap command:
8/20q FC Switch #> show setup snmp trap 1
SNMP Information
----------------
Trap1Enabled
Trap1Address
Trap1Port
Trap1Severity
Trap1Version
See also set setup
274 Command reference
snmp, page 224
Table 51
True
<sysContact undefined>
<sysLocation undefined>
HP StorageWorks 8/20q FC Switch
1.3.6.1.4.1.3873.1.11
True
True
False
False
10.0.0.254
162
warning
2
for descriptions of the common
Table 52 for descriptions of the