Configure Snmp Trap Message Recipients; Management Page-Snmp Tab - HP StorageWorks Edge Switch 2/12 Installation Manual

Note:
The user name and password are case-sensitive.
7. Click OK. The EWS interface opens with the View window displayed.

Configure SNMP Trap Message Recipients

Perform this procedure to configure community names, write authorizations, and
network addresses for up to six SNMP trap message recipients. A trap recipient is
a management workstation that receives notification (through SNMP) if a switch
event occurs.
To configure SNMP trap recipients:
1. Choose Configure > Management to displays the SNMP tab
Figure 21: Management page—SNMP tab
Edge Switch 2/12 Installation Guide
The default user name is
Installing and Configuring the Edge Switch 2/12
Administrator
and the default password is
password
.
(Figure 21).
59