Applying A Qos Policy; Applying A Qos Policy To An Interface; Applying A Qos Policy To A Vlan; Applying A Qos Policy Globally - HP 5920 Configuration Manual

Applying a QoS policy

Applying a QoS policy to an interface

By applying a QoS policy to an interface, you can mirror the traffic in a specified direction on the
interface. A policy can be applied to multiple interfaces, but in one direction (inbound or outbound) of
an interface, only one policy can be applied.
To apply a QoS policy to an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Apply a policy to the interface.

Applying a QoS policy to a VLAN

You can apply a QoS policy to a VLAN to mirror the traffic in a specified direction on all ports in the
VLAN.
To apply the QoS policy to a VLAN:
Step
1. Enter system view.
2. Apply a QoS policy to a VLAN.

Applying a QoS policy globally

You can apply a QoS policy globally to mirror the traffic in a specified direction on all ports.
To apply a QoS policy globally:
Step
1. Enter system view.
2. Apply a QoS policy globally.

Applying a QoS policy to the control plane

You can apply a QoS policy to the control plane to mirror the traffic in a specified direction on all ports
of the control plane.
To apply a QoS policy to the control plane:
Command
system-view
interface interface-type interface-number
qos apply policy policy-name { inbound | outbound }
Command
system-view
qos vlan-policy policy-name vlan vlan-id-list { inbound |
outbound }
Command
system-view
qos apply policy policy-name global { inbound |
outbound }
196