Multicast Longest-Match; Multicast Routing-Enable - HP 3600 v2 Series Command Reference Manual
Ip multicast
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
[Sysname-vpn-instance-mvpn] multicast load-splitting source
multicast longest-match
Syntax
multicast longest-match
undo multicast longest-match
View
System view, VPN instance view
Default level
2: System level
Parameters
None
Description
Use multicast longest-match to configure the device to select the RPF route using longest match.
Use undo multicast longest-match to restore the default.
By default, the device selects the route with the highest priority as the RPF route.
Examples
# Configure the device to select the RPF route based on the longest match principle on the public
network.
<Sysname> system-view
[Sysname] multicast longest-match
# Configure route selection based on the longest match in VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast longest-match
multicast routing-enable
Syntax
multicast routing-enable
undo multicast routing-enable
View
System view, VPN instance view
Default level
2: System level
Parameters
None
Description
Use multicast routing-enable to enable IP multicast routing.
66
Advertisement
Table of Contents
