Snmp Show Snmp - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m
show snmp
show snmp { community | host | view | group | engineID }
Syntax Description
community
host
view
group
engineID
Default
Command Mode
Usage Guideline
Examples
Switch# show snmp community
Codes: ro - read only, rw - ReadWrite
(rw)System
(ro)public
(ro)Develop
(rw)private
Total Entries: 4
Switch# show snmp host
Host IP Address
--------------------
10.48.76.100
10.51.17.1
20:64:84::154
Total Entries: 3
Switch#
CLI Reference Guide
Use this command to display the SNMP information of the device.
Display SNMP community information.
Display SNMP trap recipient information.
Display SNMP view information.
Display SNMP group information.
Display SNMP local engine ID information.
None
Privileged EXEC or any configuration mode
This command displays the SNMP information.
This example shows how to display SNMP community information.
This example is sample output from the command show snmp host.
SNMP Version
------------------
v3 noauth
v2c
v2c
Community Name
-----------------------
public
public
show snmp
SNMPv3 User Name
----------------
initial
730