Show Ipv6 Dhcp - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ipv6 dhcp

show ipv6 dhcp [ interface [INTERFACE-NAME ] ]
Syntax Description
interface
INTERFACE-NAME
Default
Command Mode
Usage Guideline
Examples
Switch > enable
Switch # show ipv6 dhcp
This device's DHCPv6 unique identifier (DUID):
0001000111A8040D001FC6D1D47B.
Switch > enable
Switch # show ipv6 dhcp interface vlan1
Switch #
CLI Reference Guide
This command is used to display DHCPv6 client configuration running
information of interface(s).
Specifies to show the interface DHCPv6 Client configuration and running
information. If interface is not entered, the command will show the device DUID.
Specifies the identifier of the interface on the device to show the DHCPv6 client
configuration and running information. If INTERFACE-NAME is not entered, the
command output will be for all IPv6 interfaces.
None
User EXEC
The show ipv6 dhcp command shows the DHCP for IPv6 client configuration
and running information of the specified interface. If the interface argument is
not presented, the DHCPv6 Client DUID will be showed.
The following example shows the DHCPv6 client's DUID:
The following example shows the DHCPv6 client for interface vlan1, when vlan1
is DHCPv6 client disabled:
show ipv6 dhcp
681