Show Startup-Config - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show startup-config

show startup-config
Syntax
Default
Command Mode
Usage Guideline
Example
Switch:15(config)#show startup-config
#Boot configuration file=flash:\configurations\def_usr.conf
#Switch Chassis-based High-Speed Switch
#Firmware Version:1.00.001
CLI Reference Guide
Use this command to display the content of the startup configuration file.
None
None
Privilege EXEC at level 15
Use show startup-config command to display the system configuration
contents of the file which is specified with the boot config command. If no boot
config command is applied, the factory default system configuration content is
displayed.
The following example shows how to display the content of the startup system
configuration file:
show startup-config
744