Lldp Dot1-Tlv-Select - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lldp dot1-tlv-select

lldp dot1-tlv-select { port-vlan | protocol-vlan VLAN-ID [, | -] | vlan-name [VLAN-ID [, | -] ] |
protocol-identify [ PROTOCOL-NAME ] }
no lldp dot1-tlv-select { port-vlan | protocol-vlan [VLAN-ID [, | -] ] | vlan-name [VLAN-ID [, | -]
] | protocol-identify [PROTOCOL-NAME ] }
Syntax Description
port-vlan
protocol-vlan VLAN-
ID [, | -]
vlan-name [VLAN-ID
[, | -]
CLI Reference Guide
To specify which optional type-length-value settings (TLVs) in the IEEE 802.1
Organizationally Specific TLV set will be transmitted and encapsulated in the
LLDPDUs and sent to neighbor devices, use the lldp dot1-tlv-select command in
interface configuration mode. To disable transmit the TLVs, use the no form of
this command.
Specify the Port Vlan ID TLV to send. The Port VLAN ID TLV is an optional
fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN
identifier (PVID) that will be associated with untagged or priority tagged frames.
Specify the Port And Protocol VLAN ID (PPVID) TLV to send. The Port and
Protocol VLAN ID TLV is an optional TLV that allows a bridge port to advertise a
port and protocol VLAN ID.
VLAN-ID [, | -] Specify the ID of the VLAN in the PPVID TLV. The VLAN ID range
is 1 to 4094. Separate nonconsecutive VLAN-ID with a comma; use a hyphen to
designate a range of VLAN-ID.
In no form of this command, the VLAN-ID [, | -] is optional. If no VLAN-ID is
specified, all configured PPVID VLANs will be cleared and no PPVID TLV will be
sent.
Specify the VLAN Name TLV to send. The VLAN Name TLV is an optional TLV
that allows an IEEE 802.1Q-compatible IEEE 802 LAN station to advertise the
assigned name of any VLAN with which it is configured.
VLAN-ID [, | -] (Optional) Specify the ID of the VLAN in the VLAN Name TLV. The
VLAN ID range is 1 to 4094. Separate nonconsecutive VLAN-ID with a comma;
use a hyphen to designate a range of VLAN-ID. If no VLAN-ID is specified, all
applicable VLANs will be sent.
In no form of this command, if no VLAN-ID is specified, all configured VLANS for
VLAN NAME TLV will be cleared and no VLAN Name TLV will be sent.
lldp dot1-tlv-select
368