Show Ip Ospf Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip ospf interface

show ip ospf interface [ IFNAME ]
Syntax Description
IFNAME
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
Use this command to display interface information for OSPF.
(Optional) Specifies the interface type of the interfaces to display the OSPF
information for.
None
User EXEC
Use this command to display interface information for OSPF. If no IFNAME is
specified the OSPF information for all interfaces will be displayed.
The following example on the next page is a sample output of this command:
show ip ospf interface
655