Dot1X System-Auth-Control - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

dot1x system-auth-control

dot1x system-auth-control
no dot1x system-auth-control
Syntax
Default
Command Mode
Usage Guideline
Examples
Switch# configure terminal
Switch(config)# dot1x system-auth-control
Switch# configure terminal
Switch(config)# no dot1x system-auth-control
CLI Reference Guide
Use dot1x system-auth-control to globally enable 802.1X authentication on a
switch. Use the no form of this command to return to globally disable 802.1X
function.
None
Disabled
Global configuration
None
This example shows how to globally enable 802.1X authentication on a switch.
This example shows how to disable 802.1x authentication globally on a switch.
Verify the settings by entering the show dot1x auth-configuration command.
dot1x system-auth-control
173