Police - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

police

police BPS [BURST-NORMAL] [BURST-MAX] exceed-action ACTION [violate-action ACTION]
no police BPS [BURST-NORMAL] [BURST-MAX] exceed-action ACTION [violate-action
ACTION]
Syntax Description
BPS
BURST-NORMAL
BURST-MAX
exceed-action
violate-action
CLI Reference Guide
To configure traffic policing using single rate, use the police command in policy-
map class configuration mode. To remove traffic policing from the configuration,
use the no form of this command.
Average rate, in bits per second.
min: 64KB max:32G.
(Optional) Normal burst size in bytes.
min:4KB max:16MB default:4KB. Unit is KB
(Optional) Maximum burst size, in bytes. Valid values are project dependent
min:4KB max:16MB default:4KB. Unit is KB
"police BPS BURST-NORMAL BURST-MAX exceed-action ACTION violate-
action ACTION
For the above case, the explicit BURST-NORMAL BURST-MAX values are
used.
"police BPS BURST-MAX exceed-action ACTION violate-action ACTION
For the above case, the default BURST-NORMAL and explicit BURST-MAX
values are used.
"police BPS exceed-action ACTION violate-action ACTION
For the above case, the default BURST-NORMAL and default BURST-MAX
values are used.
"police BPS BURST-NORMAL exceed-action ACTION
For the above case, the explicit BURST-NORMAL and explicit BURST-MAX
values are used.
Specifies action to take on packets that exceed the rate limit.
(Optional) Specifies action to take on packets that violate the normal and
maximum burst sizes.
police
472