D-Link DGS-6600-48T Cli Reference Manual page 504

DGS-6604 m
Switch(config)# interface eth3.1
Switch(config-if)# qos weight-round-robin 0 weight 2
Switch(config-if)# qos weight-round-robin 2 weight 2
Switch(config-if)# qos weight-round-robin 3 weight 2
Switch(config-if)# qos weight-round-robin 4 weight 4
Switch(config-if)# qos weight-round-robin 5 weight 0
Switch(config-if)# qos weight-round-robin 6 weight 0
Switch(config-if)# qos weight-round-robin 7 weight 0
Switch(config-if)# qos weight-round-robin 1 weight 2
Switch(config)#
CLI Reference Guide
In the following example, Weight round robin is configured on eth 3.1. For this
case, queue 5, 6, and 7 are set to strict priority mode; weight for queue 4 is set to
4 packets; weight for queue 2, 1, and 0 are set to 2 packets.
Verify the settings by entering the show qos interface command.
qos deficit-round-robin
494