Dot1X Re-Authenticate - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

dot1x re-authenticate

dot1x re-authenticate [ interface INTERFACE-ID [ mac-address MAC-ADDRESS ] ]
Syntax Description
interface
INTERFACE-
ID
mac-address MAC-
ADDRESS
Default
Command Mode
Usage Guideline
Examples
Switch# dot1x re-authenticate interface eth4.1
Switch# dot1x re-authenticate interface eth4.1 mac-address 00-40-10-28-19-78
CLI Reference Guide
Use this command to re-authenticate a specific port or a specific MAC address.
(Optional) Specifies a port to re-authenticate. This option is only valid for
physical port interface.
(Optional) Specifies a MAC address to re-authenticate. This option can be used
only in host-based mode.
None
Privileged EXEC
Entering dot1x re-authenticate without any keyword will re-authenticate all 1x-
enabled ports in the port-based mode or all MAC addresses associated with 1x-
enabled port in the host-based mode.
This example shows how to re-authenticate eth4.1.
This example shows how to re-authenticate MAC address 00-40-10-28-19-78 on
eth4.1.
dot1x re-authenticate
171