Mac-Base ( Vlan) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m
mac-base ( VLAN )
mac-base MAC-ADDRESS
no mac-base MAC-ADDRESS
Syntax Description
MAC-ADDRESS
VLAN-ID
Default
Command Mode
Usage Guideline
Example
Switch(config)#vlan 101
Switch(config-vlan)#mac-base 00-80-cc-00-00-11
Switch(config-vlan)#exit
CLI Reference Guide
Use the mac-base command to create a MAC-based VLAN ID assignment entry.
Use the no form of this command to remove a MAC-based VLAN ID assignment
entry.
Specifies the MAC address for the entry.
Specifies the VLAN ID for the entry.
Not configured
VLAN configuration
Use the mac-base command to create a MAC-based VLAN ID assignment entry.
Any frame with a source MAC address matching the entry is classified as a
member of the VLAN associated with the entry.
This example shows how to create a MAC-based VLAN ID entry.
Verify the settings with the show vlan command.
mac-base ( VLAN )
404