Show Snmp Community - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To delete a SNMP community "System":
DGS-3000-26TC:admin#delete snmp community System
Command: delete snmp community System
Success.
DGS-3000-26TC:admin#
78-6

show snmp community

Description
This command is used to display the community string configurations.
Format
show snmp community {<community_string 32>}
Parameters
<community_string 32> - (Optional) Enter the Community string.
If no parameter is specified, all community string information will be displayed.
Restrictions
None.
Example
To display SNMP community:
DGS-3000-26TC:admin#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------
private
public
Total Entries : 2
DGS-3000-26TC:admin#
View Name
----------------------
CommunityView
CommunityView
752
Access Right
------------
read_write
read_only