Vlan Name - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

vlan name

vlan name VLAN-NAME
no vlan name
Syntax Description
VLAN-NAME
Default
Command Mode
Usage Guideline
Example
Switch(config)# vlan 1000
Switch(config-vlan)# vlan name admin-vlan
CLI Reference Guide
Use the vlan name VLAN-NAME configuration command to specify the VLAN
name. Use the no vlan name command to reset the VLAN name to the default
VLAN name.
Specifies the VLAN name, an ASCII string from 1 to 32 characters that must be
unique within the administrative domain. The character syntax allowed is a
general string that does not allow spaces.
VLAN-NAME: VLANxxxx
where xxxx represents four numeric digits (include leading zeros) equal to the
VLAN id number.
VLAN configuration
Use the vlan name VLAN-NAME config-VLAN command to specify VLAN name.
The VLAN name length must be 1 to 32, and it must be unique within the
administrative domain. The error message will be returned if an invalid name or a
duplicated name is specified. Use no vlan name config-VLAN command to reset
the VLAN name to the default VLAN name.
This example shows how to set a VLAN name of VLAN 1000.
Verify the settings by entering the show vlan command.
vlan name
901