Ip Http Service-Port - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip http service-port

ip http service-port TCP-PORT
default ip http service-port
Syntax Description
TCP-PORT
Default
Command Mode
Usage Guideline
Example
Switch(config)# ip http service-port 100
CLI Reference Guide
Use this command to specify the HTTP service port. And use the default
command to return the service port to 80.
TCP port number. TCP ports are numbered between 1 and 65535. The "well-
known" TCP port for the HTTP protocol is 80.
Port 80
Global configuration
This command configures the TCP port number for HTTP.
This example set HTTP TCP port number to 100
Verify the settings by entering the show system protocol-state command.
ip http service-port
255