Show Ip Pim - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip pim

show ip pim
Syntax
Default
Command Mode
Usage Guideline
Example
Switch##show ip pim
PIM Configurations:
Register Checksum Include Data: Disabled, group-list: (None)
Register Suppression Time
Accept Register Group list
RP Address
90.1.1.1, group-list: static-rp
RP Candidate
vlan100, group-list: rp-cand, interval: 60, priority: 192
BSR Candidate
vlan100, hash-mask-length: 30, priority: 1
CLI Reference Guide
Use this command to show the PIM global information.
None
None
User EXEC or any configuration mode
Use this command to display the global information of PIM.
The following example displays PIM global information.
: 60 seconds
: pim-acp-reg
show ip pim
660