Exit - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

exit

exit
Syntax
Default
Command Mode
Usage Guideline
Example
Switch(config-if)#exit
Switch(config)#
CLI Reference Guide
Use this command to end the current configuration mode and go back to the to
the last mode used.
None
None
Any
The user can exit the current configuration mode and go back to the last mode
used.
When the user is in User EXEC mode, this command will logout the session.
This example shows how to exit from the interface configuration mode and return
to the global configuration mode.
exit
180