Show Ip Trusted-Host - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip trusted-host

show ip trusted-host [ snmp | http | https | telnet | ssh ]
Syntax Description
[ snmp | http | https |
telnet | ssh ]
Default
Command Mode
Usage Guideline
Example
Switch# show ip trusted-host
Hosts
-------------------------------------
10.48.93.100
10.51.17.1
10.52.95.90
Total Entries : 3
Switch#
CLI Reference Guide
Use this command to display the trusted host information on the device.
(Optional) Specifies which access interface which is to be displayed. If no access
interface is specified, the trusted hosts at all access interfaces will be displayed.
None
Privileged EXEC or any configuration mode at privilege level 15
This command displays the trusted host information.
This example shows how to display trusted hosts information for all access
interfaces.
Valid to Access
all access interfaces
snmp
http
show ip trusted-host
680