Show Snmp Community - D-Link xStack DGS-3120 Series Cli Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
Only Administrator-level users can issue this command.
Example
To delete a SNMP community "System":
DGS-3120-24TC:admin#
Command: delete snmp community System
Success.
DGS-3120-24TC:admin#

101-4 show snmp community

Description
This command is used to display the community string configurations.
Format
show snmp community <community_string 32>
Parameters
<community_string 32> - (Optional) Specify the Community string.
If not specify community string , all community string information will be displayed.
Restrictions
None.
Example
To display SNMP community:
DGS-3120-24TC:admin# show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------
private
public
Total Entries : 2
DGS-3120-24TC:admin#
delete snmp community System
View Name
----------------------
CommunityView
CommunityView
964
Access Right
------------
read_write
read_only