Netbios Scope-Id - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

netbios scope-id

netbios scope-id STRING
no netbios scope-id
Syntax Description
STRING
Default
Command Mode
Usage Guideline
Example
switch#configure terminal
switch(config)#ip dhcp pool pool1
switch(config-dhcp)#netbios scope-id alpha
switch(config-dhcp)#
CLI Reference Guide
This command configures the NetBIOS scope id for Microsoft Dynamic Host
Configuration Protocol (DHCP) clients. Use the no form of this command to
remove the configuration of NetBIOS scope id.
A character string. The maximum length is 18 characters.
None
DHCP pool configuration
The Scope ID is a character string which is appended to the NetBIOS name for
all NetBIOS communications over TCP/IP. It provides a method to isolate a
collection of computers that can then only communicate with each other.
The following is sample of configuring the NetBIOS Scope ID as the string
"alpha".
netbios scope-id
442