Router Ipv6 Ospf - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

router ipv6 ospf

router ipv6 ospf [PROCESS-ID]
no router ipv6 ospf [PROCESS-ID]
Syntax Description
PROCESS-ID
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # configure terminal
Switch (config) # router ipv6 ospf 0
Switch (config-router) #
CLI Reference Guide
To enable the IPv6 OSPF routing process, use the router ipv6 ospf command in
global configuration mode. To disable this function, use the no form of this
command.
(Optional) Internally used identification parameter for an OSPF routing process.
It is locally assigned and can be any positive integer. A unique value is assigned
for each OSPF routing process.
Not configured
PROCESS-ID: null
Global configuration
Use this command to enter the router configuration mode of IPv6 OSPF. In this
mode, there are other setting of IPv6 OSPF that can be configured.
The following example enables router OSPF for IPv6 configuration mode.
router ipv6 ospf
521