Lldp Tlv-Select - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lldp tlv-select

lldp tlv-select [ port-description | system-capabilities | system-description | system-name ]
no lldp tlv-select [ port-description | system-capabilities | system-description | system-name
]
Syntax Description
port-description
system-capabilities (Optional) Specify the System Capabilities TLV to send. The System
system-description (Optional) Specify the System Description TLV to send. The System Description
system-name
Default
Command Mode
Usage Guideline
Examples
Switch(config-if)# lldp tlv-select
Switch(config-if)# lldp tlv-select system-name
CLI Reference Guide
To select optional type-length-value (TLVs) in the 802.1AB basic management
set will be transmitted and encapsulated in the LLDPDUs and sent to neighbor
devices, use the lldp tlv-select command in Interface Configuration mode. To
disable transmit the TLVs, use the no form of this command.
(Optional) Specify the Port Description TLV to send. The Port Description TLV
allows network management to advertise the IEEE 802 LAN station's port
description.
Capabilities field shall contain a bit-map of the capabilities that define the
primary function(s) of the system.
should include the full name and version identification of the system's hardware
type, software operating system, and networking software.
(Optional) Specify the System Name TLV to send. The System Name should
be the system's fully qualified domain name.
When no optional keyword is selected, all supported optional 802.1AB basic
management TLVs are selected or de-selected in no form of this command.
No optional 802.1AB basic management TLV is selected.
Interface Configuration
The command is available for physical port configuration.
The lldp tlv-select command is used to select the optional TLVs to be
transmitted. If the optional TLVs advertisement is selected, they will be
encapsulated in LLDPDU and sent to other devices.
This example shows how to enable all supported optional 802.1AB basic
management TLVs:
This example shows how to enable advertising System Name TLV:
lldp tlv-select
382