Show Ip Dhcp Relay Information Trusted-Sources - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip dhcp relay information trusted-sources

show ip dhcp relay information trusted-sources
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# show ip dhcp relay information trusted-sources
List of trusted sources of relay agent information option:
VLAN100 VLAN200
Total Entries: 5
Switch#
CLI Reference Guide
Use the show ip dhcp relay information trusted-sources command to display
all interfaces configured to be a trusted source for the Dynamic Host
Configuration Protocol (DHCP) relay information option, .
None
None
User EXEC or any configuration mode
Display the DHCP relay agent configuration.
The following is sample output when the ip dhcp relay information trusted
command is configured. Note that the display output lists the interfaces that are
configured to be trusted sources.
VLAN300 VLAN400 VLAN500
show ip dhcp relay information trusted-sources
611