D-Link DGS-6600-48T Cli Reference Manual page 386

DGS-6604 m
Switch(config)# interface range eth3.3-3.4
Switch(config-if-range)# lldp management-address FE80::250:A2FF:FEBF:A056
Switch(config)# interface range eth3.1-3.2
Switch(config-if-range)# no lldp management-address 10.1.1.1
Switch(config)# interface range eth3.3-3.4
Switch(config-if-range)# no lldp management-address
FE80::250:A2FF:FEBF:A056
Switch(config)# interface eth3.5
Switch(config-if-range)# no lldp management-address
CLI Reference Guide
This example shows how to delete the management address 10.1.1.1 on eth3.1
and eth3.2. If 10.1.1.1 is the last one, no Management Address TLV will be sent.
This example shows how to delete the management address
FE80::250:A2FF:FEBF:A056 on eth3.3 and eth3.4.
This example shows how to delete all management address(es) on eth3.5 and
then no Management Address TLV will be sent on eth3.5.
lldp management-address
376