D-Link DGS-6600-48T Cli Reference Manual page 782

DGS-6604 m
show ip dhcp snooping
Use this command to display DHCP snooping configuration.
show ip dhcp snooping
Syntax
Default
Command Mode
Usage Guideline
Example
Switch# show ip dhcp snooping
DHCP Snooping is enabled.
DHCP Snooping is enabled on VLANs:
vlan10 vlan15 vlan16 vlan17 vlan18
Verify MAC address is Enabled
Information option: not allowed
Interface Trusted
---------- ----------
eth3.1
eth3.8
eth3.9
Switch#
CLI Reference Guide
Not Applicable
Not Applicable
EXEC mode or any configuration mode
Use the command to display DHCP snooping configuration setting.
This example shows how to display DHCP Snooping configuration:
no
no
yes
772