Show Ipv6 Route - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ipv6 route

show ipv6 route [ IPV6-ADDRESS [ INTERFACE-TYPE INTERFACE-NUMBER | NEXT-HOP-
ADDRESS ] | NETWORK-PREFIX / PREFIX-LENGTH [ INTERFACE-TYPE INTERFACE-
NUMBER | NEXT-HOP-ADDRESS ] | [ database ] PROTOCOL | [ database ] connected | [
database ] static ]
Syntax Description
NETWORK-PREFIX
PREFIX-LENGTH
IPV6-ADDRESS
PROTOCOL
INTERFACE-TYPE
INTERFACE-
NUMBER
database
connected
static
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use this command show ipv6 route to display the active IPv6 routes in the
system.
(Optional) The IPv6 network that is the destination of the static route.
(Optional) The length of the IPv6 prefix. A decimal value that indicates how
many of the high-order contiguous bits of the address comprise the prefix (the
network portion of the address). A slash mark must precede the decimal value.
(Optional) Displays routing information for a specific IPv6 address.
(Optional) The name of a routing protocol, specify a routing protocol, use one of
the following keywords: ospf and rip.
(Optional) Interface type. For more information about supported interface types,
use the question mark (?) to access the online help function.
(Optional) Interface number. For more information about the numbering syntax
for supported interface types, use the question mark (?) to access the online
help function.
(Optional) the routing database is shown and the active route populated in the
forwarding database is prefixed with an asterisk.
(Optional) All connected local interface routes.
(Optional) All static routes.
None
User EXEC or any configuration mode
When the system provides forwarding services for IPv6 traffic, it is very important
and helpful to check the forwarding/routing table to understand what the current
traffic path is in the network.
show ipv6 route
702