Show Qos Map - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show qos map

show qos map dscp-mutation [MAP-NAME]
Syntax Description
MAP-NAME
Default
Command Mode
Usage Guideline
Example
Switch> show qos map dscp-mutation
DSCP Mutation: mutemapl
Attaching interface:
eth2.1, eth2.2, eth2.3, eth2.4, eth2.5, eth3.1, eth3.2, eth3.3, eth3.4,
eth3.5, eth3.6, eth3.7, eth3.8, eth3.9,eth3.10
0 1 2 3
--------------------------------
00 00 01 02 03 04 05 06 07 08 09
10 10 11 12 13 14 15 16 17 18 19
20 20 21 22 23 24 25 26 27 28 29
30 30 31 32 33 34 35 36 37 38 39
40 40 41 42 43 44 45 46 47 48 49
50 50 51 52 53 54 55 56 57 58 59
60 60 61 62 63
CLI Reference Guide
Use this command to display the QoS DSCP mutation map configuration.
(Optional) Specifies the name of the DSCP mutation map to display.
None
User EXEC or any configuration mode
If no name is specified after show qos map dscp-mutation, all maps will be
displayed.
The following example displays the global DSCP mutation map.
4 5 6 7 8 9
show qos map
727