Neighbor Advertisement-Interval - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

neighbor advertisement-interval

neighbor { IP-ADDRESS | PEER-GROUP-NAME } advertisement-interval SECONDS
default neighbor { IP-ADDRESS | PEER-GROUP-NAME } advertisement-interval
Syntax Description
IP-ADDRESS
PEER-GROUP-NAME Name of a Border Gateway Protocol (BGP) peer group.
SECONDS
Default
Command Mode
Usage Guideline
Example
Switch(config)# router bgp 65100
Switch(config-router)# address-family ipv4
Switch(config-router-af)# neighbor 10.4.4.4 advertisement-interval 15
CLI Reference Guide
Use this command to set the minimum interval between each transmission of
Border Gateway Protocol (BGP) routing updates. Use the no form of the
command to return to the default configuration.
Specifies IP address prefixes.
The interval, in seconds, between each transmission of UPDATE messages. The
range is from 1 to 600.
SECONDS: 30 seconds for external peers
SECONDS: 5 seconds for internal peers
Address family configuration
Router configuration
When a BGP peer group is specified using the PEER-GROUP-NAME argument,
all the members of the peer group inherit the characteristic configured with this
command.
The following address family configuration mode example sets the minimum time
between sending BGP routing updates to 15 seconds:
Verify the settings by entering the show ip bgp neighbor command.
neighbor advertisement-interval
429