Bootfile - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

bootfile

boofile URL
no bootfile
Syntax Description
URL
Default
Command Mode
Usage Guideline
Examples
switch > enable
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# bootfile \dgs-6600\bootimage\mdubootfile.bin
switch(config-dhcp)#
CLI Reference Guide
This command is used to specify the name of the default boot image for a
Dynamic Host Configuration Protocol (DHCP) client. To delete the boot image
name, use the no form of the command.
Specifies the path name and file name of the file that is used as a boot image.
The maximum allowed string length is 127 characters
None
DHCP pool configuration
Use this command to specify the name of the default boot image for a Dynamic
Host Configuration Protocol (DHCP) client. The boot image can be located in the
same DHCP server or other network servers.
The following example specifies mdubootfile as the name of the boot file for
DHCP pool1.
bootfile
81