Dns-Server - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

dns-server

dns-server IP-ADDRESS
no dns-server [IP-ADDRESS]
Syntax Description
IP-ADDRESS
Default
Command Mode
Usage Guideline
Example
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# dns-server 10.1.1.1
CLI Reference Guide
This command configures the IP address list of DNS servers available to DHCP
clients. Use the no form of this command to remove the DNS server list.
Specifies the IP address of DNS server to DHCP clients.
None
DHCP pool configuration
This command configures the IP address list of DNS servers available to DHCP
clients under the DHCP pool configuration mode. Servers are listed in order of
preference. If the number of servers is more than 1, then execute this command
multiple times with different server IP addresses.
This example shows how to specify 10.1.1.1 as the IP address of DNS server in
DHCP address pool.
dns-server
153