Lldp Reinit - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lldp reinit

lldp reinit SECONDS
no lldp reinit
Syntax Description
SECONDS
Default
Command Mode
Usage Guideline
Example
Switch(config)# lldp reinit 5
Switch(config)# no lldp reinit
CLI Reference Guide
To set the minimum time of re-initialization delay interval on the switch, use the
lldp reinit command. Use the no form of this command to return to the default
settings.
Specifies a delay for LLDP initialization on an interface; valid values are from 1
to 10 seconds.
2 seconds
Global configuration
A re-enabled LLDP physical interface will wait for re-initialization delay after last
disable command before reinitializing.
This example shows how to set the re-init delay interval to 5 seconds.
This example shows how to set the re-init delay interval to default value.
lldp reinit
380