Show Ip Ospf - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip ospf

show ip ospf
Syntax
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
Use this command to display general information about the OSPF routing
process.
None
None
User EXEC
Display general OSPF protocol information. It provides system-wide statistics
and per area statistics for OSPF. The LSDB database overflow limit is the
capacity for the LSA table size. It is project dependent.
On the following page is a sample output from the show ip ospf command.
show ip ospf
637