Ipv6 Default-Gateway (Management Port) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ipv6 default-gateway (management port)

ipv6 default-gateway IPv6-ADDRESS
no ipv6 default-gateway
Syntax Description
IPv6-ADDRESS
Default
Command Mode
Usage Guideline
Example
Switch(mgmt-if)#ipv6 default-gateway 2000::2
Switch(mgmt-if)#
CLI Reference Guide
Use this command to set the IPv6 address of the IPv6 default gateway that is
used by the management port. Use the no form of this command to set the IPv6
default gateway to the default value.
IPv6 address, X:X::X:X
::
Management interface configuration
The management port will send out IPv6 packets destined for other IP subnets
using this IPv6 address as the gateway router.
This example shows how to set 2000::2 as the IPv6 address of the default
gateway.
Verify the settings by entering the show mgmt-if command
ipv6 default-gateway (management port)
324