Netbios Wins-Server - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

netbios wins-server

netbios wins-server IP-ADDRESS
no netbios wins-server [IP-ADDRESS]
Syntax Description
IP-ADDRESS
Default
Command Mode
Usage Guideline
Examples
switch(config-dhcp)#netbios wins-server 10.1.1.100
switch(config-dhcp)#netbios wins-server 10.1.1.200
switch(config-dhcp)#no netbios wins-server 10.1.1.100
CLI Reference Guide
To configure the IP address of a WINS server for Microsoft Dynamic Host
Configuration Protocol (DHCP) clients. Use the no form of this command to
remove the configuration of WINS server.
The IP address of the WINS server.
Not configured
DHCP pool configuration
This command is used to configure a primary and secondary WINS server. The
primary preference is the old WINS. The maximum number of configurable WINS
servers is dependent on each project.
The following example configures a primary WINS server as 10.1.1.100.
The following example configures a secondary WINS server as 10.1.1.200.
The following example removes the WINS server 10.1.1.100 so that 10.1.1.200
becomes the primary WINS server.
netbios wins-server
443